Hunting camera use

Before using the hunting camera, you should have a 5th dry battery (most of the hunting cameras on the market are powered by the 5th battery) and SD memory cards (most hunting cameras support up to 32G memory cards, and very few 30 million pixel hunting cameras support 64G memory cards). ). Install the battery and SD card on the hunting camera, check whether the hunting can work normally, and then adjust the parameters of the hunting camera according to the monitoring needs, so that the hunting camera can obtain more valuable data.
Hunting camera use
After setting the parameters of the hunting camera, you can go to the field to install it. In the installation, you should install the hunting camera according to the individual animal and the environment to be monitored. Please pay attention to the following when installing the hunting camera:

The camouflage hidden hunting triggers the camera during installation to prevent theft, and can install prompts, such as: scientific research equipment, stealing illegal!
The height of the infrared-sensing camera is similar to that of the monitored animal body, and is installed where the animal often passes (animal path) and activities.
Try not to have large leaf plants before installing the infrared sensor camera to avoid the leaves reflecting the sun and mistaking.

Install the infrared infrared camera. Do not face the ground at close range, because the ground will be accidentally shot under the sun.
When monitoring the canopy active animals such as squirrels, the corresponding canopy can be installed, and it is not limited to being installed only on the ground.
The hunting camera can stand in the field for about 6 months, and the design monitoring cycle is best for 1-2 months. The infrared sensor camera is waterproof, dustproof and cold resistant, but it should be noted that when using the hunting camera, do not let it soak in the water, or the installation position should not be too low or low, so as not to soak for a long time.