View the parameter settings for PIR sensitivity. In warm ambient conditions, set the sensor to "high" and use for cold weather, set to "low" sensor.
Place the camera's field of view in an open place.
In some cases, water near the camera can cause inductive errors. Point the camera at the ground.
Fix the camera so that it does not shake the camera.
In the evening, the sensor can sense the range of the fill light of the led light, and the sensing distance can be reduced by adjusting the sensitivity of the sensor.
The camera sensor can be triggered by sunrise or sunset. Need to re-fix the camera orientation.
If the movement of the person or animal is very fast, the target has left the photographing range when the camera starts taking a photo, resulting in no target.
2. The camera stops taking photos or does not save images.
Please make sure the SD card is not complete. If the card is full, the camera will stop storing pictures. You can open the circular sd card to avoid this problem.
Check that the power supply has enough power to keep the camera working.
Be sure to turn the camera on and do not leave the camera in preview mode or off.
When GPRS is turned on, the camera takes 1 minute to send a photo, and if it is triggered again, it takes 1 minute. If GPRS is turned off, the camera can take pictures continuously Hunting camera
Please format the SD card before use.
3. The MMS version of the camera stops sending emails or MMS messages.
Check if the SIM card costs.
Check if the phone accepting the information is working properly.
Check that the signal is too weak or there is no signal coverage.
Make sure the GPRS settings are correct
4. Can't start the machine
Check if the switch is in the open or preview mode.
Check if the battery is fully charged.
Check if the SD card is normal.
没有评论:
发表评论