Car breakdown does not matter, ten easy to teach you to teach emergency

Traveling or commuting to work often appear on the road glitches in the absence of spare parts supply and urgency to use the case, we must learn to solve their own, DOCA car start Xiaobian provide 10 kinds of emergency repair methods.

1, into, water hose rupture

Rupture is not big, can be coated with a layer of soap coated cloth will be watertight Department dressing; rupture larger, you can cut off the hose rupture, in the middle of a bamboo or iron pipe, and bundled with wire.

2, the fan belt broken

The broken belt can be tied with a wire or open the car stop the way to drive away.

3, screw hole slider

Screw hole slippage can cause oil leaks or loose connecting rods that prevent them from working. At this time, the original screw can be hammer flattened, so that both sides of the screw can be expanded and then fastened, but it can not be disassembled many times until the next maintenance.

4, fuel tank damage

When the vehicle is in use, it is found that the fuel tank is leaking oil. The oil drain can be wiped clean and smeared with soap or bubble gum on the oil spill site for temporary plugging; repairing with epoxy adhesive is better.

5, tubing rupture

Tubing rupture can be ruptured at a clean, coated with soap, wrapped with tape or tape wrapped in the pipe rupture, and tied with wire, and then coated with a layer of soap.

6, tubing break

Can be found when the tubing is broken off the root diameter of the tubing and hose or hard ice cream machine plastic pipe socket. If the socket is not tight enough, both ends of the wire tied to prevent leakage.

7, cylinder head blisters and leakage, leaking

According to the size of trachoma, use the appropriate specifications of the electrician fuse, with a hammer gently smashed into the trachoma, you can eliminate oil spills, leaking.

8, tubing leaks

When the motor vehicle is used, such as the oil leakage of the oil pipe joint, the oil pipe horn and the oil pipe nut are mostly not sealed.

Available cotton yarn wrapped around the lower edge of the horn, and then tighten the tubing nut and tubing joints; but also bubble gum or malt sugar chewed into a paste, painted in the tubing nut seat, to be dry after the condensation from the role of the seal.

9, diaphragm or pump diaphragm rupture or break

Removable oil pump remove the diaphragm, with bakelite, insulating bakelite or plastic cloth according to the original shape, size saw file molding, and polished fitted.

10, the valve spring broken

After the valve spring is broken, the broken spring can be taken off, and the broken two sections can be installed in turn to be used. You can also find a 1 mm thick sheet of metal, cut into 1 mm larger than the spring diameter of the wafer, cut a circular hole inside, the diameter is less than 4 mm in diameter, the outer edge of every 6 mm cut into 4 mm long cut, cut Good after every other one folded, forming a double-sided spring seat groove, and then turn the spring loaded into the metal tank can be used.