Car maintenance tips, unintentional anti-injury car

Correct maintenance methods and tips can indeed help maintain the vehicle, but if the car because of caring, inadvertently do the cart before the horse, can be described as "love the car heart is heartless, love to love to love is not" today to check for everyone seven A common method of faulty maintenance.

    First, too much oil easy to fail

    Many owners think it is a good thing to fill up the oil, in fact, add more oil, but very hurt the car. In order to maintain the smooth and smooth bearing and journal of the bearing, the automobile often needs the oil to act as the lubricant. However, if the engine oil is too much, the crankshaft handle and the connecting rod at the engine will produce violent agitation during the operation, which not only increases the engine Internal power loss, but also will splashed on the cylinder wall of the oil increased, resulting in burning machine oil failure. Therefore, the oil in the engine oil pan should be controlled between the upper and lower ruler of the oil dipstick as well.mobile power plant

    Second, the bolt too tight lead to permanent deformation

    Car with bolts, nuts fastened a lot of fasteners, should ensure that they have sufficient preload, but it can not be over-tightened. If over tightened, on the one hand will make the connector under the action of external force permanent deformation; the other hand, the bolt will have permanent tensile deformation, preload but decreased, or even cause the slider or broken phenomenon.

    Third, the poor effect of waxing circle

    The purpose of car waxing is not only to make the car look bright, shiny, but also to protect the car paint. Many people wax the body habitually circle, this is not the right way. Waxing the correct way is a straight line, the vertical and horizontal lines alternately, then the direction of the last flow of rain, so as to reduce the surface of the paint to produce a concentric halo effect. In addition to master waxing frequency. Due to the vehicle driving environment, parking spaces, waxing interval should be different. Generally have a garage parking, and many vehicles traveling on good roads, once every 2 to 3 months to play a wax; parked vehicles, due to wind and rain, best every 1 to 2 months to play a wax. Of course, this is not a rigid rule, the general feeling of hand touch body is not smooth, you can wax again.

    Fourth, car wash under the hot sun will damage the car paint

    Many car owners like to wash the car in the hot sun, think that after washing soon will be able to dry the body of water. In fact, the wrong thing, car wash also need to choose the right time after the sun exposure of vehicles, vehicle metal plates and paint will be heated up. Car wash at this time, a hot and cold paint will embrittlement, cracking, color dimming and then appear dark. In addition, the hot day car wash will be due to the body residual water, the sun exposure, the formation of convex lens, the body part of the high temperature, resulting in tarnished finish.

    Fifth, car wash frequency will hurt air conditioning

    Summer temperatures, rain, body easily dirty, car wash frequency also began to rise, but Uncle Sunshine here to remind you is that we must maintain the appearance of the car air-conditioning dry, if the car air conditioning accidentally being wet, it will affect To the life of car air conditioners. For the car wash frequency, under normal circumstances, a car wash 1-2 times a week is best. Because of frequent car wash, will accelerate the oxidation of paint. Car wash should be used clean, free of sediment, oil, acid and other harmful impurities in water, the other, the car should be hinged at the hood, wiper root, both ends of glass seals and other places easy to accumulate dirt, Carefully wipe clean.

    Six, free car equipment hidden

    Private cars are moving home owners, the pursuit of passenger comfort and luxury understandable, but some owners do it yourself in the car with a variety of equipment, this modification, if not properly handled, the convenience and reliability of the car performance and manipulation often Adverse effects, easy to leave sequelae or affect traffic safety, such as subwoofer, power consumption does not say that if you drive while driving too loud, it will affect the driver's safety, it will not hear Beep car to the back of the car.

    Seven, long-term car without causing damage to the parts

    Although some small partners have become car owners, they usually "do not care" to drive. They only drive out when they are on holiday and regard it as fuel saving and the best of both worlds. In fact, this car is very hurt the car. The car is not open for a long time, or rarely start, on the contrary the car is not good. Long-term car, engine and transmission parts such as transmission surface will often be in direct contact with the air and rust, the battery will be due to long-term natural discharge affect the service life. Therefore, the good start emergency power car DOCA Xiaobian suggest that owners, we must often start their own car, should not be car collection, the appropriate time to pull a pull high-speed.

Car emergency start power a key start car, cold weather to provide warm heart service

Drive in cold weather travel, it is easy to encounter various difficulties, many of them sudden low temperature flameout. Low-temperature auto-turn-off, the main battery is weak discharge capacity at low temperatures, the engine is also difficult to start due to low temperatures, thus leading to the vehicle can not start. In this case, you need a multi-purpose car emergency start power to solve.

Car emergency start power to provide warm heart service

Angie car emergency start power, fear of cold, support for firewood, steam double Kai, a key to start the car easily. High and low temperature products, even at minus 10 degrees can also successfully ignite the car; strong power, long lasting power, continuous start the car 30 times away from the trailer trouble. In the meantime, when encountering the sudden absence of electricity in the mobile phone for overseas travel, the urgent need of rescue in the field and the lost time, the small and convenient emergency power source of Angkor can also charge the devices of tablet computers, mobile phones and digital cameras and solve travel troubles. Angie comes with the compass, warning lights and other functions, security and practical escort, belonging to a family of cars with the car necessary products.mobile power plant

Ang Good car emergency start power

Another point worth mentioning, Anga car emergency start power supply safety factor is high. Product built-in microcomputer intelligent system protection circuit, overcharge, over discharge, reverse charge, short circuit and other eight protection to ensure safety. If the car parked for too long, the battery over time, you can prepare a car emergency start power, safe and easy travel.

From the application market point of view, auto emergency start power supply as a new product in the field of automotive aftermarket, but also essential for car travel share, the basic is the shopping cart will be added to the practical automotive supplies. In addition, it can be donated as a gift and friends and family, offering a different kind of enthusiasm in the cold weather. Get rid of embarrassed travel, Angkor warm service for you.

Where are the batteries?

When the environmental protection slogans shout loudly, we need to constantly retrieve whether our conduct is in harmony with the slogan. Are there any noise mixed with some commercial goods?

A variety of spells against the vicious environment have debut occasionally, draped a dazzling coat of electric vehicles from time to time to steal the spotlight, and even have a taste of playing the role of the savior. Electric cars do not drink gasoline and diesel, buttocks do not have that hateful exhaust pipe, driving the noise is also as slight as whispering, rather than the traditional car like an old man always fierce cough ... ... seems to have not found no The reasons for accepting electric vehicles, experts say the so-called "green cars, promising prospects," the rhetoric, is how assertive, therefore, we also understand the "license plate policy, the pure electric vehicles are not The list of "purchase" is how correct. It is expected that a city full of charging piles is coming.mobile power plant

Behind the extremely bright surface, whether or not there are hidden worries? Undoubtedly, until the perpetual motion machine has not been invented, any drive must consume energy. Essentially, all the things that need to consume the earth's resources are large tail wolves for the human environment. The electric energy of an electric car is stored in a battery. It can not be overestimated by the electric energy it supplies to the driving motor, which is regarded as the stomach, liver and kidney of the whole car. What is terrible is that this thing is particularly short-lived, its life is far less than the life of human organs, especially the widely used lead-acid batteries, the whole car looks quite new, far from the retirement period, the battery is due to Energy storage decay, has lost the life of recycling, only abandoned the old, with a new one.

Yes, the exhaust of traditional cars is discharged to the sky, it makes us eat enough haze of suffering, but this time, the battery can not be discarded on the electric car, can only enter, but not like a pile of ordinary The living garbage slowly degrades, can not eliminate a thousand years. So, where should they go?

Soldiers will block, water to cover, this is one of the good ideas of the Chinese people. Haze, people came up with the idea of living in plastic cover, go shopping, you can also wear masks and gas masks. So, to deal with astronomical accumulation of waste car batteries, what can we do to secure the coupons?

A friend of many who studied EV batteries told me that in fact, the disadvantages of EVs are not only the pollution of a large number of scrapped batteries, but also the dreaded dangers of battery manufacturing: lithium metal electrolytes in materials, Flux, cobalt metal and the like are carcinogens; the lithium iron membrane material necessary for the manufacture of batteries can not ignore the biological effects; and the large amount of carbon dioxide emissions generated during the production of batteries is equally terrible. Even sodium-sulfur batteries, nickel-cadmium batteries, lithium batteries, fuel cells, etc. that are being developed are still inevitable in their manufacture and use. In addition, you can ignore the battery charge, power consumption when power it? Can avoid the battery manufacturing material extraction, the production of huge pollution? Can numb to increase the amount of power generation, coal, gas in the consumption of environmental harm?

It is not enough to alarm and waste food, but calmness and reason are needed at any time. When the environmental protection slogans shout loudly, we need to constantly retrieve whether our conduct is in harmony with the slogan. Are there any noise mixed with some commercial goods? That day in the streets to go and saw a beautiful new tram passing in front of suddenly remembered the original direct drive motor bus tram, in order to take off the braid driving, recently have been all along with the battery, could not help but dizziness.

         DOCA car emergency start power has been committed to battery recycling and environmental protection, hope that the majority of riders who can minimize the pollution of life, the pollution of the atmosphere, to our common place of life of a piece of green soil.

Automotive emergency start power in the polymer lithium battery

Li-ion is widely used in communication and electronics industries as a high efficiency energy carrier, especially in personal communication devices such as cell phones and PDAs. However, with the rapid development of communication technology in recent one or two years, the appearance of mobile phone color screen technology, multimedia messaging technology, Bluetooth technology and camera technology continue to appear, and the battery capacity, volume, weight and electrochemical performance and other indicators put forward higher requirements , The traditional liquid lithium has been increasingly unable to adapt to new needs. The new polymer lithium-ion battery (Li-Poly) appeared to meet this demand. Lithium polymer battery is the third generation lithium ion battery developed on the basis of the original steel shell and aluminum shell battery. Due to its lighter, thinner and higher energy density, it is widely used in domestic and foreign communication terminals Manufacturers and design companies of all ages. The most fundamental difference between a polymer lithium-ion battery and a liquid lithium-ion battery is that the electrolytes used in the two are different. Lithium-polymer battery electrolyte from the appearance of solid, known as the polymer solid electrolyte. This electrolyte is a class of polymer materials that are in a solid state but dissolve the supporting electrolyte like a liquid and can undergo ion migration.

Here are a few examples of the eight advantages of using automotive emergency start power lithium polymer for peer reference.

A.K.E 12V / 1300mAh lithium polymer battery engineering model, equipped with automatic protection board, can short-circuit, overcharge, over discharge for effective protection. But also enable the battery to use a normal charger for reliable charging without having to worry about overcharging or underfilling conditions. Polymer lithium battery cell voltage is usually 3.7V, the maximum voltage of 4.2V.mobile power plant

1. Safety performance is good

Polymer lithium battery in the structure of the aluminum-plastic flexible packaging, unlike the liquid metal case of the metal shell, in the event of security risks, liquid batteries explode easily, and at most only the polymer batteries gas drum.

2. Small thickness, can be made thinner

Ordinary liquid lithium battery first custom shell, after the plug positive and negative village material method, the thickness of 3.6mm below the technical bottlenecks exist, the polymer batteries do not exist this problem, the thickness can be less than 1mm, in line with the current demand for mobile phones direction.

3. Light weight

Polymer battery weighs 40% lighter than the same size lithium steel, aluminum battery lighter than 20%.

Large capacity

Polymer batteries than the same size steel shell battery capacity 10 ~ 15% higher than the aluminum battery 5 to 10% higher, a color phone and MMS phones become the first choice, and now the market out of the color screen and MMS phones are mostly used Polymer batteries.

5 small internal resistance

The internal resistance of polymer batteries than the average liquid batteries is small, the current domestic resistance of polymer batteries can even do below 35mΩ, which greatly reduces the battery's self-consumption of electricity to extend the standby time of the phone can be achieved With the international standards. This polymer lithium-ion battery, which supports large discharge currents, is ideal for remote control models and is the most promising alternative to NiMH batteries.

6. Shape can be customized

Polymer batteries according to customer demand increase or decrease the thickness of the batteries, the development of new cell models, cheap, open mold cycle is short, and some can even be tailored to the phone shape to take full advantage of the battery shell space to enhance the battery capacity.

Good discharge characteristics

Polymer batteries using colloidal electrolytes, compared to liquid electrolyte, colloidal electrolytes with stable discharge characteristics and higher discharge platform.

8. Protection board design is simple

Due to the use of polymer materials, batteries do not fire, do not explode, the battery itself has enough security, so the polymer battery protection circuit design may consider the omission of PTC and fuses, thus saving battery costs.

Automotive emergency start-up power Lithium-polymer batteries offer significant advantages in terms of safety, volume, weight, capacity, and discharge performance, but prices have become a problem with polymer due to the current low production costs and high manufacturing costs, Lithium battery popularity bottleneck. According to industry analysts, to 200? Year, lithium polymer battery will occupy the world mobile phone battery market about 1/4, representing the future direction of mobile phone battery.

Thrift is a virtue! Care car to avoid waste

Owners should know that the car should be "one-third repair, seven support", although the maintenance of the car can not be forever young, but in the maintenance of vehicles, there are some car owners over-care, damaged car. Let us now tell you about the four types of waste conservation.

The first waste:

Maintenance too "hardworking." Miss Zhao is a car blind, she often receives maintenance information sent by the dealer, the new car was opened 8000 km, Miss Zhao's oil has been changed 3 times, the machine filter also changed 3 times, maintenance interval mileage of 3000 km are not To

Car maintenance cycle is the car maintenance interval mileage or time. Maintenance of high frequency is not a bad thing, can more effectively protect the performance of vehicles, but too often not necessary.

Scientifically determining the distance between various types of maintenance operations can keep the car in good technical condition regularly while also saving maintenance and repair costs.mobile power plant

The second waste:

The pursuit of high-grade gasoline. That the higher the better the label of gasoline, Mr. Zhang, because of caring for the car, two years has been to the car plus 97 gasoline.

Ordinary owners know that if the high-grade sedan uses low-grade petrol for a long time, it will produce problems such as power drop, fuel consumption increase and damage to the internal parts of the engine, which will seriously shorten the life of the engine.

Therefore, many owners like to use high standard oil. In fact, the gasoline label is not as high as possible, even high-end cars does not mean that the standard oil must be increased.

The third waste:

Tires to be imported. Some people buy tires especially like to emphasize "import", Mr. Chen playing cars is like this. However, after several experiences, Mr. Chen found that the new tires introduced abroad do not apply to domestic users. Once, his new tire just ran a mountain road, the side of the package from the side.

There is a big difference between the smooth surface of the country and the domestic road conditions. Imported tires may not be able to perform well in domestic roads. In particular, the impact resistance of the sidewalls is obviously somewhat acclimatized.

A number of foreign brands of tires in the domestic joint venture production, according to the domestic road conditions in the tire side of the increase of a layer of curtain cloth, thereby greatly enhancing the sidewall impact resistance, the joint venture of the tire in the performance can completely replace imported goods, And the price is more affordable.

The fourth waste:

Too much oil. The owner of a small car just over 5,000 km of the new car, learned to watch the oil rod Wang "May Day" ran 2000 km of high speed, afraid of oil will be enough, it will be a friend sent a bottle of oil added .

Not long ago, his new car started burning oil. This is because Wang's new car too much oil. Engine crankshaft handle at the work, connecting rod big end will produce violent agitation, increased internal engine power loss, but also to splashed on the cylinder wall of the oil increased, resulting in burning oil failure. The oil in the engine oil sump should be controlled between the upper and lower ruler of the oil dipstick.

         Finally, DOCA car emergency start power remind owners: Thrifty is the virtue!

Good battery lithium battery literacy common sense

Lithium-ion batteries have a higher energy density than nickel batteries. Because lithium is the lightest metal, you are bound to be attracted by this lighter, longer-life battery. You can recharge the Li-Ion battery whenever you need it, completely eliminating the need for a nickel-based battery that must be fully charged or discharged on a regular basis to maximize its performance. (If the charging time is too long, the liquid in the nickel battery will crystallize, preventing you from fully charging the battery and causing the inconvenience of complete discharge).mobile power plant

Standard charge

Most lithium-ion batteries use a fast charge method that charges the device 80% of the charge and converts it to a continuous replenishment charge to continue charging. Take an iPod as an example. If you're not using it while charging, you can charge 80% of your charge in about an hour, and then recharge the iPod in 2-3 hours. You can charge all lithium-ion batteries multiple times, depending on the charging cycle, but for a limited number of times.

Charging cycle. The battery runs out, and then filled for a complete charge cycle.

A charge cycle means that you run out of battery power but not the same amount of charge. For example, you can listen to the iPod for several hours a day, using only half the battery and then fully charging it. If you do this the next day, this can only count as one charge cycle, not two, so it may take several days for you to complete a cycle. Each completed charge cycle, the power will be reduced a little, though, you recharge your laptop and iPod after many cycles, will still retain 80% of the original charge. Like any other rechargeable battery, you will eventually need to replace it with a new one.

Use tips

Using an iPod or laptop at 35 ° C (95 ° F) above the specified operating temperature will continue to reduce the battery charge. That is, the battery life of your battery will not be as long as usual. If you're still charging your device at this temperature, the damage to the battery will be greater. Even storing the battery in a hotter environment can inevitably cause damage to the battery's quality.

Maintain the use of low-temperature environment

You may find that using an iPod in a relatively cool environment also reduces battery life. But this is only a temporary condition, different from the use of high-temperature environment. Once the molecules in the battery are heated, they immediately return to the previous charge.

Commonly used for your device

To maximize the performance of lithium-ion battery, you need to use it often. If you do not use your device often, remember to complete one charge cycle per month.

New battery technology available -2 minutes 70%

New battery technology available -2 minutes 70%

      On the way to work, on the road, during the holidays ...... If the phone, tablet power, and really worried. Battery life has become a major technical bottleneck in the evolution of intelligent terminals, but the dawn of light, a new lithium battery technology from Singapore is expected to bring a new breakthrough.

Lithium battery technology come out

2 minutes to charge 70%

According to foreign media reports, a research team in Singapore recently developed a new generation of lithium battery technology, just 2 minutes can be filled with 70% of the power, through this technology, lithium battery charging speed can be increased 20 times the use of time can be extended To 20 years.

Chen Xiaodong, an associate professor at Singapore's Nanyang Technological University, said that using nano-technology, electric vehicles can significantly increase the cruising range in only 5 minutes, which can compete with the current time spent on cars. And apply this technology to the intellectual mobile phone, will bring more imagination space.

However, this is not a new battery technology, but based on the existing technology to achieve an improvement. The key comes from a nanostructure: Instead of using conventional graphite to make the battery positive, it uses a cheap titanium dioxide gel. This material is also used in sunscreen to absorb ultraviolet light. Scientists have found that the compound can be made into nanostructures can speed up the charging speed.

The researchers said they will bring the new technology to market in two years. Although we have seen many new breakthroughs in battery technologies before, they are expected to gain rapid adoption due to their reliance on existing technologies.

Battery life has been criticized by the terminal manufacturers Qi force

With the rapid development of smartphones, the performance of mobile phones is getting stronger and stronger, the screens are getting bigger and bigger, and the power consumption of mobile phones is also rising. However, the battery life has not been substantially improved. When using a smart phone one or two days a full charge of the phenomenon is very common, battery life has been criticized by consumers. Therefore, Apple, Samsung, Microsoft and other terminal manufacturers have also been researching battery technology.

According to a former Apple executive revealed that Apple's technical staff over the years has been trying to implant iPhone and iPod solar charging function to develop a more intelligent battery. According to sources familiar with Apple's plans, Apple is still testing solar charging.

In June of this year, Microsoft has introduced a new battery technology, will be a larger battery into two smaller lithium-ion batteries, in order to deal with different power consumption, the battery life of 20% to 50% .

Intelligent wearable device battery life has also been everyone's attention. For example, Samsung Electronics has been considering a new type of battery designed for wearable computing devices. Last year, the company introduced Dream Battery with solid electrolyte to increase battery life and eliminate explosions and other security risks from bendable electronics.

Battery technology revolution

Will solve the terminal development worries

For consumers, the quality of the battery life is directly related to the user experience, it also affects the choice of consumers in the purchase of intelligent terminal products, intelligent terminal products, especially smart phones in the lithium battery technology breakthroughs will be To make up for this short board, get more consumer support.mobile power plant

In addition, with the improvement of production technology and the increasing demand of consumers, in the future, intelligent terminal products will gather more functions and applications, and the power consumption of terminal batteries will continue to increase. The problem of battery life was once called by industry insiders Is the bottleneck restricting the development of the industry. Therefore, the industry generally believes that the battery technology breakthrough will lay a solid foundation for the development of intelligent terminals.

However, the maturity and popularity of the new battery technology apparently still take some time, but as more companies to participate and promote, I believe that to solve this problem will not be far away. Anga car emergency start power has also been committed to the development of fantastic battery, I believe, however, how long, the new battery technology will be more mature.

         More Automotive Emergency Power Lithium Polymer Battery News Please click on our industry news.

Car maintenance tips, unintentional anti-injury car

Correct maintenance methods and tips can indeed help maintain the vehicle, but if due to the car is eager, inadvertently done the cart before the horse, can be described as "love the car heart is heartless, love to love to love is not" today to check for everyone seven A common method of faulty maintenance.

    First, too much oil easy to fail

    Many owners think it is a good thing to fill up the oil, in fact, add more oil, but very hurt the car. In order to maintain the smooth and smooth bearing and journal of the bearing, the automobile often needs the oil to act as the lubricant. However, if the engine oil is too much, the crankshaft handle and the connecting rod at the engine will produce violent agitation during the operation, which not only increases the engine Internal power loss, but also will splashed on the cylinder wall of the oil increased, resulting in burning machine oil failure. Therefore, the oil in the engine oil sump should be controlled between the upper and lower ruler of the dipstick as well.mobile power plant

    Second, the bolt too tight lead to permanent deformation

    Car with bolts, nuts fastened a lot of fasteners, should ensure that they have sufficient preload, but it can not be over-tightened. If over tightened, on the one hand will make the connector under the action of external force permanent deformation; the other hand, the bolt will have permanent tensile deformation, preload but decreased, or even cause the slider or broken phenomenon.

    Third, the poor effect of waxing circle

    The purpose of car waxing is not only to make the car look bright, shiny, but also to protect the car paint. Many people wax the body habitually circle, this is not the right way. Waxing the correct way is a straight line, the vertical and horizontal lines alternately, then the direction of the last flow of rain, so as to reduce the surface of the paint to produce a concentric halo effect. In addition to master waxing frequency. Due to the vehicle driving environment, parking spaces, waxing interval should be different. Generally have a garage parking, and many vehicles traveling on good roads, once every 2 to 3 months to play a wax; parked vehicles, due to wind and rain, best every 1 to 2 months to play a wax. Of course, this is not a rigid rule, the general feeling of hand touch body is not smooth, you can wax again.

    Fourth, car wash under the hot sun will damage the car paint

    Many car owners like to wash the car in the hot sun, think that after washing soon will be able to dry the body of water. In fact, the wrong thing, car wash also need to choose the right time after the sun exposure of vehicles, vehicle metal plates and paint will be heated up. Car wash at this time, a hot and cold paint will embrittlement, cracking, color dimming and then appear dark. In addition, the hot day car wash will be due to the body residual water, the sun exposure, the formation of convex lens, the body part of the high temperature, resulting in tarnished finish.

    Fifth, car wash frequency will hurt air conditioning

    Summer temperatures, rain, body easily dirty, car wash frequency also began to rise, but Uncle Sunshine here to remind you is that we must maintain the appearance of the car air-conditioning dry, if the car air conditioning accidentally being wet, it will affect To the life of car air conditioners. For the car wash frequency, under normal circumstances, a car wash 1-2 times a week is best. Because of frequent car wash, will accelerate the oxidation of paint. Car wash should be used clean, free of sediment, oil, acid and other harmful impurities in water, the other, the car should be hinged at the hood, wiper root, both ends of glass seals and other places easy to accumulate dirt, Carefully wipe clean.

    Six, free car equipment hidden

    Private cars are moving home owners, the pursuit of passenger comfort and luxury understandable, but some owners do it yourself in the car with a variety of equipment, this modification, if not properly handled, the convenience and reliability of the car performance and manipulation often Adverse effects, easy to leave sequelae or affect traffic safety, such as subwoofer, power consumption does not say that if you drive while driving too loud, it will affect the safety of drivers driving, it will not hear Beep car to the back of the car.

    Seven, long-term car without causing damage to the parts

    Although some small partners have become car owners, they usually "do not care" to drive. They only drive out when they are on holiday and regard it as fuel saving and the best of both worlds. In fact, this car is very hurt the car. The car is not open for a long time, or rarely start, on the contrary the car is not good. Long-term car, engine and transmission parts such as transmission surface will often be in direct contact with the air and rust, the battery will be due to long-term natural discharge affect the service life. Therefore, the good start emergency power car DOCA Xiaobian suggest that owners, we must often start their own car, should not be car collection, the appropriate time to pull a pull high-speed.

Car trouble yourself easily get

Do maintenance, do not go to a professional store, you can start hands. Frequent car owners must have encountered the trouble caused by car glitches - not spending money, a small problem often spend most of the day, heart-breaking injury. In fact, you can check their own small problems, get yourself. Save time, save money, follow us to say, you may wish to give it a try.

              Small medical records 1: dim lighting effects lighting

              Description: In some vehicles, due to long-term use, the car will appear dimming front and rear lights, and some consumers think the light yellow, aging problems should be replaced, but may also be the stain into the headlight glass without having to change.mobile power plant

The company is located in:

Expert advice: If you have this problem, you can use alcohol to wipe the lamp again, eliminating fingerprints and oil can do so can extend the life of the lamp.

The company is located in:

Small medical record 2: wiper blade abnormal vibration and noise

The company is located in:

Description: Due to seasonal and summer wiper blades frequently used and other reasons into the fall, the wipers often abnormal vibration of the vehicle, if to the 4S shop, will be asked to replace the wiper blade, easily to $ 80, in fact Not worthwhile.

The company is located in:

DOCA car start power Xiaobian advice: If the above problems, you can use forceps to the wiper blade at the joints and clip the gap at the rubber sheet can be adjusted small, and to check the wiper blade rubber is aging, if aging, you must To change.

The company is located in:

Mini-medical records 3: Engine abnormal jitter after starting the car in the morning

The company is located in:

Description: Many owners start the car in the autumn and winter morning on the road, the vehicle engine was found to shake very powerful, to the 4S shop inspection, but the results did not detect any problems.

The company is located in:

Anga car start power Xiaobian advice: the morning vehicle jerk simple processing: individual cylinder work is not good, the valve is closed lax, and the oil did not reach the best working temperature, it will make the vehicle engine jitter anomaly, running speed is A way, but also in the 3 block or 4 block on the high-speed running for a while, the same effect.

Six principles, make the market recognized multi-function car power

In fact, no one thought of emergency start-up power car market in the rise, it appears to have brought a lot of riders convenience, but the emergence of a product will always be accompanied by good and bad, and a formed multi-purpose car The emergence of emergency start-up power, all need to be designed to be fully demonstrated in front of consumers. So do you want to do the market recognized multi-purpose car start power, which principles to follow?mobile power plant

The following principles must be observed when designing a multi-purpose car emergency startup power architecture:

1, cooling.

Assuming that in hot (> 30 ° C), poor airflow, or even no airflow, we should design the thermal design based on the minimum efficiency of the DC-DC converter. And we also need to provide them with good air circulation conditions to dissipate heat, so as to achieve the best cooling conditions.

2, control costs.

In the design of automotive multifunction emergency power supplies, the cost is a factor that needs to be considered important in the design process. So we can easily design and trim a traditional, unoptimized power source at a given project budget, becoming a PCB type, with options for packaging and other design constraints.

3, layout and location.

The overall performance of multi-function car emergency start power will limit the layout of PCB components, power supply design, structural design constraints, high-chip integrated power supply design constraints. Therefore, in balancing the overall system performance, mechanical limitations and costs of automotive multifunction emergency power supplies, designers need to make realistic plans based on specific project needs.

4, electromagnetic radiation.

As things change, electromagnetic radiation will gradually produce with the electric field, the frequency of its electric field and the radiation determines its radiation intensity, a working circuit will be directly interfered with by other circuits. These negative effects are non-cancellable, so OEMs have set limits on the maximum electromagnetic radiation available to ECU units, minimizing these negative effects so they can be controlled.

5, voltage VIN range.

Everyone should know that the transient range of 12V supply voltage can determine the input voltage range of power conversion ICs. Among them, the most common automotive emergency power supply voltage range is 9V to 16V. However, due to environmental factors, conditions and other aspects of the use of automotive emergency power supply, the voltage may be ± 100V, so the industry standard ISO7637-1 defines the voltage range of automotive batteries.

6, Turn-off current (ISD) and quiescent operating current (IQ).

    If the number of automotive electronic control unit in the case of a sharp rise in the total consumption of the car battery will also be a sharp increase in consumption. Therefore, OEM manufacturers generally begin to limit the IQ of each ECU so as to ensure that the quiescent operating current IQ is within a controllable range. For example, the EU set the requirement is: 100μA / ECU, so the IQ of the ECU typically less than 100μA has become the standard for most EU vehicles.

So, want to be a qualified, standard car emergency start power, as long as the above six principles, can certainly be made to get any multi-functional market emergency power supply, we have always insisted Anga these principles to the user's vital interests To make products, we Anga car emergency start power supply in the market so popular. A good business is to be careful to make products, conscience products.

The latest car repair information mandatory open or will break the monopoly of 4S shop technology

Currently, the vehicle manufacturers to master the core data of the vehicle, including electronic control system data, circuit diagrams, maintenance manuals, are only available to its authorized dealer. This led to 4S shop in vehicle maintenance, especially when it comes to engine, transmission, wire and other key parts of the maintenance, there is a social car repair unparalleled technical advantages, the formation of a technical monopoly situation. 4S shop there is a small disease big rule, only for no reason, working hours fee high has been a hot issue owners complain about, but because of the 4S shop has a monopoly of technological advantages, so consumers can often only "bitterly say ".mobile power plant

Recently, the "Administrative Measures on the Open Implementation of Technical Information on Vehicle Maintenance" (hereinafter referred to as the "Measures") have been approved by the Ministry of Transport in conjunction with the MEP, the Ministry of Commerce, the SAIC, the SAQSIQ, the State Certification and Accredit Regulatory Commission, Intellectual Property Office, China Insurance Regulatory Commission formulated since January 1, 2016 come into operation.

After the implementation of the Measures, consumers can make good use of the relevant provisions in the documents to make their own cars more economical and efficient.

Car repair do not have to "bind" 4S shop

"Measures" clearly automobile manufacturers should use online information disclosure, open sales models of maintenance and technical information. The Measures require that "automobile manufacturers disclose the maintenance of the sold automobile models to all maintenance operators and consumers without discrimination, without discrimination and without delay, with available information, convenient information channels and reasonable information prices Technical information shall not be excluded through technical barriers to restrict competition, blockade or monopoly of the vehicle maintenance market.At the same time, automobile manufacturers should disclose technical information on vehicle maintenance to relevant information users in the society.

The "approach" from the beginning of next year, once implemented, 4S shop in the technical information on vehicle maintenance monopoly will be broken, the maintenance of social auto repair unit resources will be strengthened, they will be in the maintenance of professional 4S shop side by side and possible.

In response to the Measures, the Ministry of Transport previously submitted 10 amendments to the current Regulations on the Administration of Motor Vehicle Maintenance (hereinafter referred to as the "Regulations"), and the revised "Regulations" will be released on January 1, 2016 Implementation. The second paragraph of Article V stipulates: "The entrusting party has the right to choose the maintenance operator for maintenance at its own discretion, and no entity or individual may, except the manufacturer of the automobile, fulfill the responsibility of" Three Guarantees "for the recall of the defective automobile product and the automobile quality, Mandatory maintenance manager. "

According to this provision and the preceding "Measures" provisions, consumers can choose according to the actual situation of the more affordable price system, more flexible operating mechanism of social auto repair units, without having to be 4S shop "bound."

"Homogeneous parts" approved

The Measures require that "the promotion of the use of homogeneous parts be promoted so as to promote the insurance companies to define the precise definition of damage based on maintenance technical information and the use of homogeneous parts, reduce maintenance costs and insurance costs, and protect the interests of consumers." For the first time, the "Regulations" "Homogeneous parts", that is, "product quality equal to or higher than the standard requirements of loading parts, and has good loading performance of the accessories", and clarify the caretaker, maintenance operators can use the same accessories to repair motor vehicles.

In the context of the formal recognition of homogeneous parts, consumers can be more confident to go to the social auto repair shop to buy a low price, but with the "original parts" comparable to the same accessories, which can effectively reduce the cost of the car. At present, the e-commerce operators are also actively distributing the aftermarket vehicles. The homogeneous parts sold through the e-commerce providers can reach the consumers directly from the manufacturers, eliminating the intermediate links and reducing the cost of using the consumer. However, the analysis of the industry, the current promotion of homogeneous parts still exist a unified code, quality certification, brand certification and a lot of work needs to be done.

The old car is also guaranteed

According to the requirements of the Measures, auto makers shall, as of January 1, 2016, publicly repair technical information for CCC-certified passenger vehicles within 6 months starting from the date of listing of the vehicles; January 1, 2008, the public after July 1, 2008 CCC certification and sales of passenger vehicles to maintain technical information.

In other words, starting next year, new models must be promptly released vehicle maintenance technical information, and the old models by 2017 at the latest to open the appropriate information. Otherwise car producers will be punished.

Some owners of older models often encounter hard to find accessories, maintenance is not easy, the maintenance of information disclosure, you can more effectively solve this problem, the owner can also be based on open maintenance information to find the appropriate solution.

Turn off the power first, to prevent the car inexplicable power consumption

Car power consumption refers to the closure of the engine and vehicle electrical equipment, locking the door, the driver no longer use the vehicle and the battery loss of electricity phenomenon. Chronic consumption of the car battery power shortage, resulting in the vehicle can not start, often bring great inconvenience to the owner.mobile power plant

Modern automotive circuit complexity, power equipment and more, such as audio, security, central locking, electric windows and doors. These electrical equipment, the ignition switch is closed, there is still power supply, therefore, find the vehicle power consumption, should first figure out which electrical power switch after the ignition switch, and then one by one excluded. Automotive emergency start power expert advice:

Turn off the engine, audio, air conditioning, pull the handbrake, close all doors, front nacelle cover, trunk lid, observe the instrument panel with or without indicator light, if there is no indicator light, battery positive terminal in series with a multimeter measuring current, should normally display 0.00 ma, when useful electrical work, the current between 0.03ma to 0.6ma display.

1. Check the lighting system, small lights, brake lights, handbrake lights, gear lights and interior lights, door lights are closed.

2 car cabin cover lights, trunk lights, etc. are closed.

3. Anti-theft check, remove the alarm to observe the current.

4. Check the air conditioning system, blowers, air conditioning switches, electric fans, etc. are closed.

5. Use electrical power cord grounding, when a certain electrical appliances appear broken wire, ground, do not work with electrical, one by one should be ruled out the point of failure.

Car power consumption of many factors in the maintenance process, one by one for the power equipment should be excluded.

Learn these car maintenance tips also go to what 4S shop

Many people say 4S shop maintenance expensive, in large part because the 4S shop to do something you do not have to do, many projects, although the car is indeed beneficial, but the price is high. Moreover, there are many projects can do it yourself without the 4S shop to do. In line with the purpose of making more consumers save money, auto emergency start power experts today said several do not have 4S shop, do it yourself maintenance program.

    Engine lubrication system cleaning

    This is a common flicker 4S shop project, the price is generally around 100-300. 4S shop often advise consumers to do this maintenance project, but this project is actually very simple, is to add a bottle of lubrication system cleaning agent before maintenance into, and then let the engine idling for 10 to 15 minutes, and then let go of the old oil, It's that simple. But why the price is so expensive? Working hours inside this project is actually very low, it is about 20, the rest are materials costs, a bottle of cleaning agents, cheap 200 about two brands, expensive about 300, but also more expensive.

Learn these car maintenance tips also go to what 4S shop

    And if you do this project yourself? Can buy a bottle of their own before replacing the engine oil for maintenance, the operation is very simple, but the money saved is not a little bit. A bottle of engine lubrication system cleaning agent, in the large fly electricity supplier, the price will be between 30-80, the brand to buy a big brand like.mobile power plant

    Is this project useful? Personally think that is still very useful, insist on doing so, 100,000 kilometers after the engine or not and there is a big difference, for the engine is good. As for how long to do such a maintenance? Do not do so often every time, basically 20,000 kilometers to 40,000 kilometers to do just fine.

    Engine lubrication system protection

    In the 4S shop, this project is generally sold together with the lubrication system cleaning and packaging bundles, the price is between 100-300, the operation is very simple, that is, when the oil change, the new oil a little less, and then add this engine System lubricants. The cost is also, working hours are very cheap, expensive materials.

Learn these car maintenance tips also go to what 4S shop

    This maintenance can also do not have 4S shop materials, as long as the maintenance time prior to communicate with the technician, so technicians bring you to protect the agent just fine. The protective agent can also be purchased in the reliable electricity supplier, the price will not be as cheap as the lubrication system cleaner, but also how cheaper than the 4S shop.

    But personally think that if you care for the quality of the oil is better, do not need this additive.

    fuel additive

    Not only is the fuel additive 4S shop to sell, gas stations have sold, 4S shop price between 70-300. The general function is to improve the purity of the fuel. In this case, the power of the vehicle will increase and the economy will naturally be better. So, the difference is so big? In general, the effect of fuel additives is indeed quite obvious, especially under the premise of the fuel added is not good, for the car is also good.

Learn these car maintenance tips also go to what 4S shop

    Fuel additives can not 4S shop, buy the same outside, the price can be a lot cheaper.

    However, this thing together do not think so simple, although added directly to the tank, but now many of the car's fuel tank is leak-proof spill-proof design, there is a filler inside the baffle, fuel gun just to be able to block The plate baffles to refuel, and add additives when you need a longer funnel.

    Oil / nozzle cleaning

    Now 4S shop to do the oil and nozzle cleaning is not removed to clean, are to use "playing bottle" way to clean the "bottle" need special tools, but also need to take a lot of pipe, The average consumer is not able to own car "hit the bottle." So why do I still categorize this project into my own category?

    Because cleaning the oil and nozzle can not play hanging bottle, directly inside the fuel plus detergent is the same effect. And this method of adding detergent inside the fuel is more economical, a bottle of oil and nozzle cleaning agent, even if the quality is good, then more than 100 dollars. Mode of operation is quite simple, add this cleaning agent to the tank, then fill the oil on the line.

    If this project does not need to press the product at all, a bottle of one or two thousand kilometers will be used. If the quality of the regular added fuel is good, a bottle of 10,000 can be used.

    Combustion chamber carbon cleaning

    And oil cleaning, 4S shop to do the combustion chamber coke cleaning is also a "bottle hanging" approach, and ordinary consumers can also be used in the fuel Riga cleaning additives to solve, and the effect is really not better than " Hit the bottle "how much worse.

    And this project not to do so often, 20,000 - 40,000 km plus a bottle of cleaning additives on the line.