The degree of completion of your first plane was entirely up to you.
Even the family bought the aircraft model, assembling aircraft also involves a plane from a pile of parts in all aspects. You may have a great sense of accomplishment, but you also need a lot of knowledge and skills. You’ll have to buy your own motor, battery, battery, remote control, etc..
We do not recommend that you use a traditional light wood coach to make your first aircraft. You should learn to fly and enjoy the fun before you take the risk of blowing up your hard work.
If you buy a set of Ready (Almost to Fly, that is, quasi hand flying) remote control aircraft, then 90% of the things have been completed in the ARF. All you need to do is to buy motors, batteries, batteries and remote control. At this time, you also need to master some model knowledge, but the production is not so difficult.
If you are learning to fly at the same time, you want to intervene in the field of model aircraft production, then the ARF suite will be a good way to get started. 75C FPV lipo packs
If you want to fly the aircraft as soon as possible, then buy a set of RTF (Ready To Fly, that is, “flying”) will be the best choice. RTF electronic equipment on the plane (motor and receiver) has been fully installed. In addition to some of the basic assembly work (such as installing the wing to the fuselage), all you need to do is to recharge the battery, install the transmitter battery and fly.
In recent years, all kinds of foam material in electric RTF aircraft has attracted many people to go. They are affordable, convenient use, provides a shortcut to the devil. To deal with a pile of foam, the “worst” maintenance is also playing with all kinds of glue.
没有评论:
发表评论